CIRCUTOR CVM-B Series - Manual (Page 115)

figure 100: Digital outputs information screen (Transistor Digital Inputs/Outputs Module)
If no key is pressed for 5 minutes, the display screen changes automatically to the default
screen, which displays the voltage measurement of 4 parameters.
5�5�3�2�- Analogue Inputs/Outputs expansion modules
The screen in figure 101 , is one of the information display screens for the expansion module.
figure 101: Analogue outputs information screen (Analogue Inputs/Outputs Module)�
This screen displays the configuration of the analogue inputs of the module.
The following options appear in the lower area:
Analogue inputs, to display how the inputs have been configured.
Analogue outputs, to display how the outputs have been configured.
115 Instruction Manual
CVM-B100 - CVM-B150