CIRCUTOR CVM-B Series - Manual (Page 298)

7�9�4�- CONfIgURATION
You can access the setup menu on the main screen, figure 25 .
The screen in figure 206, is the home screen of the setup menu.
figure 206: Main screen of setup menu�
All the possible programming parameters for the unit appear in the lower area. To configure the
expansion modules you need to, using the keys
and , browse the various parameters
until finding the expansion modules icon, .
To access the selected parameter, press the key .
If no key is pressed for 5 minutes, the display screen changes automatically to the default
screen, which displays the voltage measurement of 4 parameters.
The main screen of the expansion modules is shown in figure 207 .
figure 207: Main screen of expansion modules�
298
CVM-B100 - CVM-B150
Instruction Manual