CIRCUTOR CVM-B Series User Manual
Page 261
All the possible programming parameters for the unit appear in the lower area. To configure the
expansion modules you need to, using the keys
and
, browse the various parameters
until finding the expansion modules icon,
.
To access the selected parameter, press the key
.
If no key is pressed for 5 minutes, the display screen changes automatically to the default
screen, which displays the voltage measurement of 4 parameters.
The main screen of the expansion modules is shown in
figure 181: Main screen of expansion modules�
Displayed here are all the expansion modules connected to the unit.
If in the unit there is more than one module of the same type connected, a number will appear
in the icon to differentiate them
; the module with the lowest number has the lowest serial
number.
Use the
and
buttons to move to the different options and select the
Modbus TCP
(Bridge) communications
icon.
Press the button
to open the main configuration screen of the Modbus TCP
communications module,
261
Instruction Manual
CVM-B100 - CVM-B150