Starting up the unit – CIRCUTOR CVM-B Series User Manual
Page 22
Advertising
3.5.- STARTING UP THE UNIT
Once the
CVM-B is connected to the power supply, the following screen,
figure 11
, appears on
the display and checks the integrity of the unit and detects the expansion modules.
figure 11: Initial check screen of the CVM-B�
When the checking process has finished, the welcome screen is displayed (
figure 12
) until the
key is pressed to continue with the start-up.
NB: If 20 seconds elapse without pressing the
key, the unit moves directly to the measure-
ment screen by default.
figure 12: CVM-B welcome screen�
22
CVM-B100 - CVM-B150
Instruction Manual
Advertising