CIRCUTOR CVM-B Series User Manual
Page 203
6�3�8�5�2�- Transistor digital outputs
The
Latch variable occupies 2 registers.
All other variables
occupy 1 register each.
Table 64: Modbus memory map: Alarm status: Transistor digital outputs�
Alarm status: Transistor digital outputs
Configuration variable
Address
Valid data window
Alarm
Impulse
output
Output 1
Output 2
Alarm
Impulse
output
Latch
(1)
kWh or Wh
7530-7531 7544-7545
0: unlock alarm
1: locked alarm
kWh or Wh energy
meter
Delay in the
connection
(2)
Wh or mWh
7532
7546
Energy meter which
indicates the value
of the connection
delay variable (ON)
Wh or mWh energy
meter
Delay in the
disconnection
(2)
Energy meter
factor
7533
7547
Energy meter which
indicates the value
of the disconnec-
tion delay variable
(OFF)
Energy meter factor
meter
Alarm activation date:
Year
(2)
-
7534
7548
2013 to 2076
-
Alarm activation date:
Month
(2)
-
7535
7549
1 to 12
-
Alarm activation date:
Day
(2)
-
7536
754A
1 to 31
-
Alarm activation time:
Hour
(2)
-
7537
754B
0 to 23
-
Alarm activation time:
Minutes
(2)
-
7538
754C
0 to 59
-
Alarm activation time:
Seconds
(2)
-
7539
754D
0 to 59
-
Not used
Not used
753A
754E
-
-
Not used
Not used
753B
754F
-
-
Status
(2)
753C
7550
0: No alarm,
1: Active alarm
Alarm status
(2)
753A
754E
0: No alarm,
1: Pre-alarm,
2: Connection or disconnection delay,
3: Alarm,
4: Impulses,
(1)
If the latch option has been programmed in an alarm and it has been activated, the alarm will be unlocked with
this option.
(2)
For these variables only
function 0x04 is implemented: reading registers.
Note: The 14 registers must be written at once (as a group), otherwise it will respond with an
error.
203
Instruction Manual
CVM-B100 - CVM-B150