CIRCUTOR CVM-B Series User Manual
Page 216
Displayed here are all the expansion modules connected to the unit.
If in the unit there is more than one module of the same type connected, a number will appear
in the icon to differentiate them
; the module with the lowest number has the lowest serial
number.
Use the
and
buttons to move to the different options and select the
Relay digital
Inputs/Outputs icon
.
Press the button
to open the main configuration screen of the relay digital Inputs/Outputs
module,
figure 155: Main configuration screen of relay digital inputs/outputs.
The following options appear in the lower area:
Digital inputs
(1)
, to select the configuration of the digital inputs.
Digital outputs
(1)
, to select the configuration of the relay digital outputs.
Back, returns to the home screen of the expansion modules menu,
.
Main Menu, back to the main menu,
figure 25
.
(1)
If in the unit there is more than one module of the same type connected, a number will
appear in the icon to differentiate them; the module with the lowest number has the lowest
serial number.
Use the keys
and
to select the different options.
To confirm the selection, press the key
.
If no key is pressed for 5 minutes, the display screen changes automatically to the default
screen, which displays the voltage measurement of 4 parameters.
216
CVM-B100 - CVM-B150
Instruction Manual