CIRCUTOR CVM-B Series - Manual (Page 74)

The following icons also appear in the active power maximum demand parameters:
Indicating that the parameter refers to inductive or capacitive energy.
Use the keys
and to browse the various parameters.
If there is an alarm associated with the variable being displayed, the following will be shown:
The module with which the alarm is associated.
The associated output in the module.
The alarm status: not activated, pre-alarm activated, alarm activated.
The icon flashes during the delay time in the alarm connection (ON) and
disconnection (OFF).
The lower area menu disappears when selecting the parameter to display.
Press the key to display the lower area again.
The following icons also appear in the lower area:
Back, returns to the default parameters display screen, figure 50�
Main Menu, back to the main menu, figure 25 .
If you press the key while selecting a display parameter, you will enter the parameter
display menu.
5�1�2�1�3�1�- Demand parameters display menu�
For each demand parameter, this menu enables ( figure 60 ):
figure 60:Demand parameters, display menu (display 3 parameters)�
74
CVM-B100 - CVM-B150
Instruction Manual