CIRCUTOR CVM-B Series User Manual
Page 251
Next, selects the next parameter
�
Confirm, confirms and saves in the memory the values programmed on the screen
�
Back, returns to the main configuration screen for analogue inputs,
Main Menu, back to the main menu,
figure 25
.
Use the keys
and
to select the different options.
To confirm the selection, press the key
.
If no key is pressed for 5 minutes, the display screen changes automatically to the default
screen, which displays the voltage measurement of 4 parameters.
7�4�3�2�-
Analogue outputs�
Select the output to configure on the main configuration screen for the analogue outputs,
.
figure 175: Main configuration screen for analogue outputs.
The following options appear in the lower area:
...
Analogue outputs, 1 to 8, to select the configuration of each of the 8 ana-
logue outputs.
Back, returns to the main configuration screen for analogue inputs/outputs,
.
Main Menu, back to the main menu,
figure 25
.
Use the keys
and
to select the different options.
To confirm the selection, press the key
.
251
Instruction Manual
CVM-B100 - CVM-B150