AGI Security GV-CONCT - Manual (Page 161)

GV-ASManager Quick Start Guide
151
5
5.4.2 Configuring a Door
1. To define the doors on the controller, click the Door/Gate tab. This dialog box appears.
Figure 5-7
2. In the General section, enable Set Door Info to configure door settings such as
password, lock reset time and fire action etc.
3. Define the access mode by clicking the Authentication Schedule button. This dialog
box appears.
Figure 5-8
4. To define which kind of access mode should be applied at specific day and time, select
one access mode on the toolbar and drag the mouse over the timelines. Four access
modes are available in the system: