AGI Security GV-CONCT - Manual (Page 40)

30
2.3 Programming Mode
After powering on GV-AS110, you must create two Master Cards first, an Enroll Card and a
Delete Card. The Enroll Card is used for adding new cards and the Delete Card is used for
deleting cards. Either Master Card will allow you to program the various configurations on
GV-AS110.
Note: The card complying with ISO 14443A standard for smart card technology can be
formatted as an Enroll Card or Delete Card.
To create the Master Cards:
1. Power on the unit. The LED flashes blue.
2. Present a card to be the Enroll Card.
3. Present a card to be the Delete Card.
4. The GV-AS110 will automatically load default, and the LED will flash blue and yellow.
After 1 to 2 minutes, the LED should be a constant blue light to indicate READY.
2.3.1 Adding and Deleting Cards
Using the Master Cards, you can add new cards to GV-AS110 and delete existing cards on
GV-AS110.
Note:
1. GV-ASManager cannot manage the cards enrolled on GV-AS110, since the card data
will not be transmitted to GV-ASManager.
2. The cards added through GV-ASManager cannot be deleted on GV-AS110.