AGI Security GV-CONCT - Manual (Page 162)

152
„ Card Mode: This is the default mode. This mode only requires the user to present
the card to be granted access.
„ Release Mode: Keep the door in an unlock status with the reader.
• Release by Card: The door will unlock only after a card is presented and will
remain unlocked during the time specified for Release Mode. This option is
designed to prevent unattended doors from opening during the Release Mode.
„ Card and PIN Code Mode: This mode requires the user to present the card and
then enter the card’s PIN code on the keypad to be granted access.
„ Card or Common Mode: This mode requires the user to present the card to be
granted access OR enter the door’s password using the keypad to be granted
access.
5. The settings in the Alarm Event and Camera Mapping section are OPTIONAL. For
details on camera mapping, see Chapter 5 Video Integration in GV-ASManager User’s
Manual.
6. Click OK several times and return to the main screen. A controller folder tree will be
displayed on the Device View window and you will see the icon when connection
between the controller and GV-ASManager has been established.
Note: For the disconnection messages displayed on the Status column, see D. Controller
Status in Appendix of GV-ASManager’s User Manual.