2 connecting output devices – AGI Security GV-CONCT User Manual
Page 88
78
3.6.2 Connecting Output Devices
GV-AS Power Board provides two types of power outputs: 24V AC/DC, 10V to 13V DC. The
figure below illustrates the locations of these power outputs.
Figure 3-34
•
24V AC/DC: GV-AS Power Board provides two power outputs of 24V AC/DC. The power
current AC or DC is based on the input power source and Vout Swtich you turned on. If
the input power source is AC but the Vout Swtich is switched to DC Output, the two
power outputs of 24V DC will be enlarged to 30V DC.
•
10V to 13V DC: GV-AS Power Board provides six power outputs of 10V to 13V DC in
order to power on the output devices of low current.
Before connecting any output devices, note the following electrical specifications.
Voltage Output
Maximum
Current
Absolute Combined
Maximum
Absolute Combined
Wattage
2 Power Outputs
(24V AC/DC)
1.85A (each) 1.85A (24V AC Power In)
2A (24V DC Power In)
2A (24V AC Power In)
6 Power Outputs
(10 to 13V DC)
1.85A (each)
4A (24V DC Power In)
63W