AGI Security GV-CONCT - Manual (Page 24)

14
1.3.2 Accessing the Card Manager
The Card Manager option is used to add cards, delete cards and reset the card’s APB
function.
Note:
1. GV-ASManager cannot manage the cards enrolled on GV-AS100, since the card data will
not be transmitted to GV-ASManager.
2. The cards added through GV-ASManager cannot be deleted on GV-AS100.
1.3.2.A Adding a Card
Up to 1,000 cards can be enrolled on GV-AS100 directly without needing additional software.
When working with GV-ASManager software, GV-AS100 can support up to 40,000 cards.
1. Press the code ＊227 (＊CAR).
2. Present the Master Card and enter its PIN code. The LCD displays Add New Card.
3. Press #. The LCD displays Enter New Card.
4. To add a card, you can either press the card number or present the card to the unit. The
LCD displays the card number and these options: 1)N 2)A 3)B 4)S.
N stands for a normal card; A stands for a two-person A card; B stands for a two-person
B card; S stands for a security card.
5. Select a card type, and enter and confirm a PIN code for the new card.
The LCD displays Store New Card, 1. Yes? 2. No?.
6. Press 1 to save and exit.
1.3.2.B Deleting a Card
1. Press the code ＊227 (＊CAR).
2. Present the Master Card and enter its PIN code. The LCD displays Add New Card.
3. Press 0. The LCD displays Del Card Data.
4. Press #. The LCD displays Enter Del Card.
5. You can either press the card number or present the card to the unit.
The LCD displays: Delete, 1. Yes? 2. No?.
6. Press 1 to save and exit.