AGI Security GV-CONCT - Manual (Page 62)

52
3.3 Other Settings
3.3.1 Network Configuration Switch
When the Network Configuration switch is set to the left position, you can modify
Advanced Settings of GV-AS400 through its Web interfaces. When the switch is set to the
right position, Advanced Settings are not accessible. For details on Advanced Settings, see
3.4 Web-Based Configurations.
Figure 3-12
3.3.2 Resetting the GV-AS400
1. To reset GV-AS400, press the Reset button in the upper center of GV-AS400 circuit
board for three seconds.
2. To reset the Ethernet module of GV-AS400, press the EM Reset button located on the
Ethernet module for three seconds.
Figure 3-13