AGI Security GV-CONCT User Manual

Page 44

Advertising
background image

34

mode, press *5264#.

Open door

with card

number and

PIN code

_ _ _ _ _ _ _ _(_ _ _ _)#

Enter the 8-digit card

number and enter its 4-

digit PIN code.

To open the door without presenting a card,
enter the 8-digit card number on the back of the
individual card and its 4-digit PIN code.

Set ID

743_ _ _#

Enter an ID number

between 0 and 255.

Set an ID number for GV-AS110 to a number
between 0 and 255.
For example, to set the ID number to be 3,

press *743003#

Security Mode

276_ _ _ _#

4 digits PIN code of the

security card.

In the Security Mode, no cards can be granted
access and no one can program the unit. Only
the Security Card can disable the Security
Mode.
To enable the Security Mode, press *276,
enter the PIN code of the Security Card and
press #. Present the Security Card.
To disable the Security Mode, simply press the
PIN code of the Security Card and present the
Security Card.

Two Person

Entrance

873_#

DisableÎ0
EnableÎ1

When Two Person Entrance mode is enabled,

both Two Person A Card and Two Person B

Card must be presented to unlock the entrance.
To enable Two Person Entrance, press *
8731#

Two Person

Exit

879_#

DisableÎ0
EnableÎ1

When Two Person Exit mode is enabled, both

Two Person A Card and Two Person B Card

must be presented to unlock the exit.
To enable Two Person Exit, press *8791#

Select Input

Contact Type

426_ _ _#

NOÎ1
NCÎ0

Specify the input contact type of the door

sensor in the first blank digit, button in the

second blank digit and fire sensor in the third

blank digit. The default value is normally

opened (NO).
For example, to set the input contact type for

door sensor to be normally open (NO), button to

be normally closed (NC), and fire sensor to be

normally open (NO), press *426101#.

Load Default

362#

To restore GV-AS110 to factory default, press

362#. All configured settings will be cleared

and all cards will be deleted from GV-AS110.

Note: The Parking Entry Type and Parking Exit Type only work when the sensor input of
Car Detection is activated.


Advertising
This manual is related to the following products: