AGI Security GV-CONCT - Manual (Page 172)

162
Q6: The GV-ASManager cannot receive card messages from the GV-Reader
connected to the GV-AS Controller through RS-485 interface.
1. Make sure the GV-Reader is correctly wiring to the GV-AS Controller and Switch 4 on the
GV-Reader is set to OFF.
2. Make sure the correct GV-Reader ID is set on the GV-AS Controller.
Q7: How can I find more help?
Visit our website at http:///www.geovision.com.tw
Write to us at [email protected]