KIP Graphics Pro - Manual (Page 13)

KIP Graphics Pro
No part of this publication may be copied, reproduced or distributed in any form without express written permission
from KIP.  2015 KIP. v1.
- 13 -
Printer Configuration
Clicking on the P R I N T E R C O N F I G U R A T I O N button while an installed printer is highlighted will open T HE C ONFIGURATION
W IZARD . You may also double-click on the printer to do the same.
In case of a highlighted queue the
C O N F I G U R E Q U E U E window will open. You can also use a double-click to perform the same
action.
For further details configuring a queue please go to
C REATE Q UEUE within this chapter.
Delete Printer
If you want to remove one printer, highlight the printer in question under I N S T A L L E D P R I N T E R S and click the D E L E T E
P R I N T E R button (or click D E L E T E within the context menu that appears after right-clicking on an installed printer).
You will need the
D E L E T E button in order to erase installed queues.
If a printer is in use for a queue, it cannot be deleted: you have to erase the queue that is using the printer in question first.
The single Configuration Dialogs
Right-click on a printer under I N S T A L L E D P R I N T E R S , highlight P R I N T E R C O N F I G U R A T I O N and select the needed configuration
dialog from the context menu:
By using W I Z A R D you will rerun T HE C ONFIGURATION W IZARD for the selected printer.