KIP Graphics Pro - Manual (Page 72)

KIP Graphics Pro
No part of this publication may be copied, reproduced or distributed in any form without express written permission
from KIP.  2015 KIP. v1.
- 72 -
You have the option to print single panels. Each panel is displayed with a magenta-colored border. To activate or deactivate
the panels just click on the desired panels.
Right-clicking on the Panel Preview image opens a context menu which provides other ways to select panels for printing:
A L L P A N E L S – activates all panels.
N O P A N E L S – deactivates all panels.
I N V E R T S E L E C T I O N – turns activated panels into deactivated and vice versa.
Overlap / Glueborder
You can print with overlaps or glueborders. Overlaps are filled with the image where as the glueborder will add white areas.
Note: If you set the maximal print width of the printer under
S I Z E G I V E N , it is reduced by the selected overlap.
Advanced Paneling
For further customizing please tick A D V A N C E D P A N E L I N G and click C H A N G E . Here you can change the size of each panel
individually.