KIP Graphics Pro - Manual (Page 46)

KIP Graphics Pro
No part of this publication may be copied, reproduced or distributed in any form without express written permission
from KIP.  2015 KIP. v1.
- 46 -
You will get to the filter editor with the menu fields
C H A N G E and N E W below the drop down list. Using them you will be able to
set a personalized F I L T E R .
You may save a current or new filter on your system if you push the
S A V E button. It becomes achievable after any changes in
the F I L T E R E D I T O R . Enter a filter name which will be at your disposal in the F I L T E R drop down list further on.
Further details referring to creating, changing and saving filters are described in the
§ F ILTER E DITOR .
Brightness
You may alter the brightness of a copy with the brightness slider. When using normal originals, we recommend setting the
value of the slider to 0. Moving the slider to the left (negative values) will result in a copy darker than the original, whereas
moving the slider to the right (positive values) will make a brighter copy. Clicking on the button
R E S E T will reset the slider to its
original position.
Use Color Management
If you want to work with the color management, check the box U S E C O L O R M A N A G E M E N T . Click on the speed button
in the same field to open the C O L O R M A N A G E M E N T O P T I O N S window .