Orion System VCM-X/RNE Operator Interfaces - Manual (Page 71)

VCM-X / RNE Operator Interfaces Technical Guide
INDEX
71
A-C
0-10 VDC CW.........31
1 HVAC Unit w/Boxes on Multiple Loops Screen.........26,36
2-10 VDC CW.........31
24-Hour Military Format.........16
55 - 75 Tons.........32
63.........10
95 - 105 Tons.........32
120 - 140 Tons.........32
1111.........12
2222.........12
2359.........16
A
Adaptive Defrost Timer Adjustment.........46
Address, Entering.........9
AHU Heat Call Space Temperature, VAV/Zone.........60
Airfl ow
VAV/Zone Status.........65
Alarm Relay Confi guration.........27,37
Alarms
Button.........9
Clearing.........11,13
MiniLink Polling.........11,66
Modular Service Tool.........11,13
Search Screen.........13
VAV/Zone Status.........65
Alarms for VCM-X / RNE.........57
Analog Output Override Screen.........69
Arrow Keys, Defi ned.........8
Auto Damper Force Mode.........68
Automatic Power Down.........14
B
Balance-Test Button.........69
Defi ned.........9
Box Air Temperature
VAV/Zone Status.........64
Box Confi guration
VAV/Zone.........58
Box Heat Allow
VAV/Zone.........59
Broadcast
Internal Schedule Screen.........26,35
Internal Time Clock Screen.........25,35
Outdoor Air Humidity Screen.........25,35
Outdoor Air Temperature Screen.........25,35
Status Fan & Heat Screen.........25,35
Supply Temperature Screen.........25,35
VAV Boxes Force to Fix Screen.........26,36
VAV Boxes Force to Max Screen.........26,36
Broadcast to Multiple Loops.........26,36
Building Pressure
Deadband Setpoint.........44
Modulating Control Screen.........24,34
Output %.........53
Output Signal Screen.........24,34
Reverse Acting Control Screen.........24,34
Setpoint.........44
VCM-X / RNE Status.........53
Buttons
Balance Test.........69
Confi guration.........58
Overrides.........12
Schedule.........16
Setpoints.........38,58
Status.........49
Bypass Damper.........19,29
Bypass Damper Signal.........56
C
CFM, Outdoor Air.........23,32
CFM, Return Air.........23,33
CFM, Supply Air.........23,33
Change Passcodes.........12
Circuit A.........55
Circuit A Temperature.........54
Circuit B.........55
Circuit B Temperature.........54
Clear Alarms.........13
Alarms.........11
Clear Key
Defi ned.........8
Closed
Damper Force Mode.........68
CO
2
Level.........52
Protection Limit Max Level.........44
Protection Limit Reset Range.........44
Protection Limit Setpoint.........44
Sensor Maximum Scale Screen.........24,33
Sensor Output Signal Screen.........24,33
Coil 1 Temperature.........54
Coil 2 Temperature.........54
Coil A1 Temperature.........54
Coil A2 Temperature.........54
Coil B1 Temperature.........54
Coil B2 Temperature.........54
Coil Suction Temperature.........54
Coil Temperature.........51,54,55
Coil Temperature Setpoint.........51
Coil Temperature Status.........54
CommLink.........10
Communications Screen.........10,13
Compressor A1.........54