Orion System VCM-X/RNE Operator Interfaces - Manual (Page 77)

VCM-X / RNE Operator Interfaces Technical Guide
INDEX
77
R-S
Scheduling.........16
Space Temperature Return Air and Slide Adjust.........50
Static Pressure Output %.........52
Status Screens.........49
Supply Air Temperature & Setpoint.........49
Supply Fan Relay.........57
Supply VFD Override.........69
Time & Date.........15
Unoccupied Mode.........17
Week Schedules.........16
RNE Setpoints.........38
Adaptive Timer Defrost Adj. Setpoint.........46
Building Pressure.........44
Building Pressure Deadband.........44
CO
2
Protection Limit.........44
COIL Sensor Calibration.........47
Cool Reset Source.........39
Cutoff Temperature.........41
Dehumidifi cation Coil Temperature.........42
Dehumidifi cation Indoor RH & OA Dewpoint.........42
Economizer Maximum Position if High
CO
2
Level.........43
Economizer Minimum Position & Control Rate.........43
Economizer OAT/WB Enable.........43
Head Pressure.........42
Heat Pump Auxiliary Heating Delay.........46
Heat Pump Defrost Setpoints.........46
Heat Reset Source.........40
Heat Wheel Defrost Setpoint.........47
HVAC Mode Select Deadband.........39
HVAC Mode Sensor Slide Offset.........46
HVAC Schedule.........45
Internal Schedule Optimal Start Soak Multiplier.........47
Low Ambient Temperature.........45
Max OA Damper Tempering Limit.........45
Mechanical Heat/Cool Failure Time Period.........45
Minimum Supply Fan VFD Speed for Heating.........41
Morning Warm Up Temp.........41
Outdoor Air CFM.........43
Outdoor Air CFM Deadband.........43
Outdoor Air Cooling & Heating Lockouts.........41
Preheat Ambient Temperature.........45
Push-Button Override Duration.........46
Reset Source Cooling.........39
Return Air Bypass Damper Factor.........44
SAT Cooling.........39
SAT Heating Setpoints.........40
Screens.........39
Sensor Calibration for RAT & OAT.........47
Sensor Calibration for SPC & SAT.........47
Stage Control Window.........41
Static Setpoint, Deadband & Control Rate.........44
Supply Fan Starting Delay Timer.........45
Trend Log Interval.........47
Unoccupied Setbacks.........39
RNE Tonnage
55 - 75 Tons.........32
95 - 105 Tons.........32
120 - 140 Tons.........32
RNE Tonnage Screen.........32
S
SA (Stand Alone).........10
SAT Heating Setpoints.........40
Saturation Vapor Pressure.........42
Schedule
Button.........9,16
Mode.........67
Override.........16,17
Time & Date.........15
Scheduling
VCM-X / RNE Controller.........16
Screens
1 HVAC Unit w/Boxes on Multiple Loops.........26,36
Adaptive Defrost Adjustment Setpoint.........46
Alarm Search Screen.........13
Analog Output Override Screen.........69
Broadcast Internal Schedule Screen.........26,35
Broadcast Internal Time Clock Screen.........25,35
Broadcast Outdoor Air Humidity Screens.........25,35
Broadcast Outdoor Air Temperature Screen.........25,35
Broadcast Status Fan & Heat Screens.........25,35
Broadcast Supply Temperature Screen.........25,35
Broadcast VAV Boxes Force to Fixed Screen.........26,36
Broadcast VAV Boxes Force to Max Screen.........26,36
Building Pressure Deadband Setpoint.........44
Building Pressure Modulating Control Screens.........24,34
Building Pressure Output Signal Screens.........24,34
Building Pressure Reverse Acting Screens.........24,34
Building Pressure Setpoint.........44
CO
2
Protection Limit Setpoint.........44
CO
2
Sensor Maximum Scale Screen.........24,33
CO
2
Sensor Output Signal Screen.........24,33
Communications Screen.........10,13
Confi guration Screens.........18
Control Outdoor Air CFM.........23,32
Cooling & Heating Stage Delays Screens.........27,37
Cool Reset Source Setpoints.........39
Cutoff Temperature Setpoints.........41
Daylight Savings Time Auto Adjust Screen.........15
Dehumidifi cation Coil Temperature Setpoints.........42
Dehumidifi cation Control Screens.........20,30
Dehumidifi cation Indoor RH & OA Dewpoint
Setpoints.........42
Dehumidifi cation Priority Screen.........20,30
Dehumidifi cation Unoccupied Screens.........20,30
Digital Compressor Signal Screen.........21
Dual Digital.........22