Orion System VCM-X/RNE Operator Interfaces - Manual (Page 73)

VCM-X / RNE Operator Interfaces Technical Guide
INDEX
73
E-H
E
Economizer
Control Screen.........20,30
Maximum Position if High CO
2
Level Setpoint.........43
OAT/WB Enable Setpoint.........43
Overrides.........69
Relay Confi guration.........27,37
Status.........49
Economizer %.........52
Economizer Open Percentage.........52
Economizer Relay.........57
Emergency Heat Confi guration.........27,37
Emergency Shutdown Input.........25,34
Energy Saving.........15
Screen.........14
Timer.........14
Enter
Key.........8
New Passcode.........12
ESC Key, Defi ned.........8
Exhaust Fan Relay.........57
Exhaust Fan Relay Confi guration.........27,37
Exhaust VFD Override.........69
Expansion Relays Heating Stages
VAV/Zone.........59
F
Fan On Min.........61
Fan Status.........65
Fan VFD Percentage.........19,29
Firestat Input.........25,34
Fixed Damper Force Mode.........68
Fixed Position Damper Airfl ow.........61
Free Cooling.........43
Full Digital Module.........53,54,55
Coil Temperature Status.........54
Signal Status.........55
Status Screen.........54
Full Digital Module Screen.........22
Full Digital Signal.........55
Full Digital Temperature.........54
G
Gas Reheat Relay.........57
H
H/C Changeover Box VAV/Zone.........58
Head Pressure Condenser Fan #1 Status.........56
Head Pressure Condenser Fan #2 Status.........56
Head Pressure Cooling Setpoint Status Screen.........48,56
Head Pressure Module Screen.........22,32
Head Pressure Reheat Setpoint Status Screen.........48,56
Head Pressure Setpoint Cooling.........42
Head Pressure Setpoint Reheat.........42
Heat During Dehumidify Screen.........20,30
Heating
Min Off Time.........27,37
Min Run Time.........27,37
Setpoints.........64
Stage Down.........27,37
Stage Up.........27,37
Status.........49
Heating/Cooling Demand VAV/Zone Status.........64
Heating Stage Relay.........57
Heating Stage Relay Confi guration.........27,37
Heat Pump
Auxiliary Heating Delay.........46
Control Screen.........24,34
Heat Pump Defrost Setpoints.........46
Heat Pump Defrost Temperature.........46
Heat Pump Defrost Timer.........46
Heat Reset Source Setpoints.........40
Heat Total MiniLink PD Status.........67
Heat Wheel Defrost Setpoint.........47
Heat Wheel Relay.........57
HGR Relay.........57
Hi SAT Cutoff.........41
Holidays
Programming.........16
Start/Stop Times.........17
HVAC Mode
Cooling Setpoints.........39
Heating Setpoints.........39
Reset Source Screen.........19,29
Schedule Setpoint.........45
Select Deadband Setpoint.........39
Sensor Slide Offset Setpoint.........46
Setpoints.........39
HVAC Mode Enable Screen.........19,29
HVAC Reset Source.........19,29
Fan VFD Percentage.........19,29
No Reset.........19,29
Outdoor Air Temperature Sensor.........19,29
Remote Reset Signal.........19,29
Return Air Temperature Sensor.........19,29
Single Zone VAV.........19,29
Space Temperature Sensor.........19,29