Orion System VCM-X/RNE Operator Interfaces - Manual (Page 81)

VCM-X / RNE Operator Interfaces Technical Guide
INDEX
81
V-Z
VCMX-23-VCMX-WSHP-A.........22,26,54,55
VCMX-23-VCMX-WSHP-C.........22,54,55
VCM-X Controller.........49
Alarm Conditions.........57
Analog Output Override.........69
Building Pressure Output %.........53
Bypass Damper Signal.........56
Coil Temperature.........51
Confi guration Screens.........19
Cooling.........49
Damper Force Modes.........68
Date.........15
Dewpoint Temp.........51
Economizer.........49
Economizer Overrides.........69
Exhaust VFD Override.........69
Heating.........49
Holidays.........16
Holiday Start/Stop Times.........17
Indoor RH Setpoint.........51
Leaving Water Temperature.........50
MHGRV Output %.........53
Mod Cooling %.........53,56
Mod Cooling Override.........70
Mode.........49
Mode Cooling Setpoint.........49
Mode Enable Temperature.........49
Mode Heating Setpoint.........49
MODGAS Output %.........53
Mod Heating %.........53
Mod Heating Override.........70
OA Dewpoint.........51
Occupied Mode.........17
Outdoor Air Relative Humidity.........51
Outdoor Air Temperature.........51
Outputs Force.........69
RA Bypass Override.........70
RA Damper Override.........70
Relay Overrides.........69
Return Air Damper Signal.........56
Schedule Override.........17
Scheduling.........16
Space Temperature Return Air and Slide Adjust.........50
Static Pressure Output %.........52
Status Screens.........49
Supply Air Temperature & Setpoint.........49
Supply Fan Relay.........57
Supply VFD Override.........69
Time & Date.........15
Unoccupied Mode.........17
Week Schedules.........16
VCM-X Modular Controller.........22,54,55,56
VCM-X Schedule Holidays.........16
VCM-X Setpoints.........38
Adaptive Timer Defrost Adj. Setpoint.........46
Building Pressure.........44
Building Pressure Deadband.........44
CO
2
Protection Limit.........44
COIL Sensor Calibration.........47
Cool Reset Source.........39
Cutoff Temperature.........41
Dehumidifi cation Coil Temperature.........42
Dehumidifi cation Indoor RH & OA Dewpoint.........42
Economizer Maximum Position if High CO
2
Level.........43
Economizer Minimum Position & Control Rate.........43
Economizer OAT/WB Enable.........43
Head Pressure.........42
Heat Pump Auxiliary Heating Delay.........46
Heat Pump Defrost Setpoints.........46
Heat Reset Source.........40
Heat Wheel Defrost Setpoint.........47
HVAC Mode Select Deadband.........39
HVAC Mode Sensor Slide Offset.........46
HVAC Schedule.........45
Internal Schedule Optimal Start Soak Multiplier.........47
Low Ambient Temperature.........45
Max OA Damper Tempering Limit.........45
Mechanical Heat/Cool Failure Time Period.........45
Minimum Supply Fan VFD Speed for Heating.........41
Morning Warm Up Temp.........41
Outdoor Air CFM.........43
Outdoor Air CFM Deadband.........43
Outdoor Air Cooling & Heating Lockouts.........41
Preheat Ambient Temperature.........45
Push-Button Override Duration.........46
Reset Source Cooling.........39
Return Air Bypass Damper Factor.........44
SAT Cooling.........39
SAT Heating Setpoints.........40
Screens.........39
Sensor Calibration for RAT & OAT.........47
Sensor Calibration for SPC & SAT.........47
Stage Control Window.........41
Static Setpoint, Deadband & Control Rate.........44
Supply Fan Starting Delay Timer.........45
Trend Log Interval.........47
Unoccupied Setbacks.........39
VCM-X WSHP Controller.........22,26,54,55
VFD.........19,29
VFD Full.........31
VFD Half.........31
Voltage
Maximum for Main Fan.........26,36
Voting Zone Confi guration.........58