Orion System VCM-X/RNE Operator Interfaces - Manual (Page 82)

INDEX
VCM-X / RNE Operator Interfaces Technical Guide 82
W
Warm-up Mode Relay.........57
Warm-up Mode Relay Confi guration.........27,37
Water Source Heat Module
Coil Temperature Status.........54
Signal Status.........55
Water Source Heat Pump.........53
Water Source Heat Pump Installed Screen.........32
Week Schedules
VCM-X / RNE Controller.........16
Wetbulb Temperature.........52
Wiring
Power/Comm Board.........6
WSHP Protection Module Screen.........22
Y
Year.........15
Z
Zone Alarm
Delay.........62
Offsets.........62
Zone Damper Position
VAV/Zone Status.........65
Zone Temperature
VAV/Zone Status.........64
W-Z