Canon REALiS 4K501ST Pro AV 5000-Lumen LCoS Projector - Manual (Page 108)

Menu Settings
108
Positional lock
> [Install settings] > [Positional lock]
Operation of installation-related functions can be prohibited.
• Image flip H/V • Keystone • Professional settings • Lens - Position (Save
position, Lens shift reset)
Image flip H/V
> [Install settings] > [Image flip H/V]
Specify the orientation of how the projector is installed.
Keystone
> [Install settings] > [Keystone]
Specify either [Horizontal-vertical keystone] or [Corner adjustment] keystone
adjustment. Keystone adjustment can also be reset. Keystone adjustment can also
be applied by pressing the
KEYSTONE button on the remote control.
Option Function
Off Enables adjustment of installation-related functions.
On Prevents adjustment of installation-related functions.
Option Function
None Select for normal projection, without inversion.
Ceiling mounted
Select when the projector is installed upside-down on the ceiling.
The projected image is inverted in the vertical direction.
Rear
Select this to project an image from behind the screen.
The projected image is inverted in the horizontal direction.
Rear, Ceiling mounted
Select when the projector is installed upside-down on the ceiling
and behind the screen.
The projected image is inverted in both vertical and horizontal
directions.
• To hang the projector from the ceiling, use the optional bracket. Contact the Canon
Customer Support Center for more detailed information.
• Image flipping will reset any adjustment for keystone distortion. In this case, redo the
adjustment.
• Adjusting the [Image flip H/V] setting does not alter button assignments in the
projector’s side controls.
Option Function
Horizontal-vertical
keystone Apply horizontal-vertical keystone adjustment. Image height and
length is adjusted.
Corner adjustment
Apply corner adjustment. Each corner of the image can be
repositioned.
Reset Resets any adjustments to the keystone value.