Canon REALiS 4K501ST Pro AV 5000-Lumen LCoS Projector - Manual (Page 22)

Before Installation
22
■ Install Facing in the Correct Direction
• There are no options for installing the projector other than the ceiling attachment ( P37 ,
P38 , P195 ).
• When mounting the projector on the ceiling, it is more convenient to install the projector
right-side up, with the adjustable feet facing down.
• The projector can be installed facing any direction, as shown
below. However, projection upward or downward may shorten the
useful life of the lamp.
• For upward or downward projection, refer to instructions for
[Vertical projection] ( P112 ) in the [Install settings] menu.
• Do not attempt to install the projector for upward or downward
projection by yourself. Always request installation by a qualified
technician or the Canon Customer Support Center.
* Failure to do so may damage the lamp.
Upward
projection:
Inclination of the
projector should
be no more than
10° from the
vertical axis.*
Downward
projection:
Inclination of the
projector should
be no more than
10° from the
vertical axis.*
If installing the projector
on the floor or hanging
from the ceiling, the left /
right inclination of the
projector should be no
more than 10°.* Do not use the
projector standing
on its side.*
10° 10°
10°
10°
10° 10°