Canon REALiS 4K501ST Pro AV 5000-Lumen LCoS Projector - Manual (Page 121)

121
Menu Settings
Ad
va
nc
ed
G
u
ide
Me
nu
Se
tt
ing
s
Guide
Shows the guide screen.
Option Function
Off Hides the guide screen.
On Shows the guide screen.
Show input status
Specify whether signal status is shown when there is no signal or when you are completing
signal settings.
Option Function
Off The input status is not displayed.
On The input status is displayed.
Lamp warning display
Specify whether to show a lamp replacement message after the lamp has been used for a
specified period.
Option Function
Off The prepare lamp message and the lamp warning are not displayed.
On The prepare lamp message and the lamp warning are displayed.
Air filter warning display
A message advising you to perform cleaning can be set to display when the filter needs
cleaning.
Option Function
Off The air filter warning is not displayed.
On The air filter warning is displayed.
The guide screen is shown at the following cases.
• No input signal is detected.
• An invalid button is pressed in [BLANK] or [FREEZE] mode. (
P32 )
• When positional lock ( P108 ) is set to [On] and buttons locked by this feature are
pressed.
• When it is almost time to replace the lamp, the projector’s [LAMP] indicator will
flash. For details, see “LED Indicator Displays” ( P29 ).
• Setting display to [Off] will disable both the message to prepare a replacement lamp
and the warning to replace the lamp. To review the replacement timing, check the
lamp counter (
P128 ).
• Lamps that are still used after the timing for lamp replacement are more likely to
rupture. Replace the lamp with a new one as soon as possible.
Setting [Air filter warning display] to [Off] will disable display of the warning to clean
the air filter. We recommend checking the air filter counter (
P129 ) occasionally to
know when to replace the filter.