Canon REALiS 4K501ST Pro AV 5000-Lumen LCoS Projector - Manual (Page 84)

84
Using Menus
Use the menus to set the operation of the projector in detail.
Menu Configuration
The menu screen is divided into 6 tabs as shown below.
Contents of menu Menu items
[Information] tab ( P138 )
You can check information about the
signal types of the images projected and
other information.
[System settings] tab ( P118 )
You can set the operation of the projector.
[Image adjustment] tab ( P99 )
You can adjust the image quality and colors
according to your preference.
[Network settings] tab ( P131 )
These settings are for when using the projector
from a PC via a network.
For the network settings, refer to “Network
settings” (
P130 ).
[Install settings] tab ( P107 )
This setting is used when installing the projector.
[Input settings] tab ( P95 )
You can set the type of signal or the method of
projection of the images input.