Canon REALiS 4K501ST Pro AV 5000-Lumen LCoS Projector - Manual (Page 65)

Projection Procedure
65
Basic
Guide
Pr
oje
cti
on
Pr
oc
ed
u
re
Step 3 Adjust the Image
Setting the Display Resolution of the Computer
Based on the maximum resolution of the projector, set the display resolution of the
computer to the resolution closest to the output signal resolution of the projector.
(
P177 )
Maximum resolution
•
4096 x 2160: When [Panel drive mode] is set to [4096x2160].
• 4096 x 2400: When [Panel drive mode] is set to [4096x2400].
For details on the Panel drive mode, see [Panel drive mode] in [Professional
settings] (
P109 ).
■ Windows 10
1
Open the [Control Panel] from the start menu, then select [Appearance
and Personalization] - [Adjust screen resolution] in the [Control Panel
Home].
2
Click the [Resolution] tab, and move the slider to select the resolution
closest to the maximum output signal resolution of the projector.
3
Click the [OK] button.
■ Windows 8.1 / Windows 8
1
Move the cursor toward the upper or lower right corner to access the
menu.
2
Click [Settings], and then click [Control Panel].
3
From [Control Panel Home] - [Appearance and Personalization], select
[Adjust screen resolution].
4
Click the [Resolution] tab, and move the slider to select the resolution
closest to the maximum output signal resolution of the projector.
5
Click the [OK] button.
■ Windows 7
1
Open the [Control Panel] from the start menu, then select [Appearance
and Personalization] - [Adjust screen resolution] in the [Control Panel
Home].
2
Click the [Resolution] tab, and move the slider to select the resolution
closest to the maximum output signal resolution of the projector.
3
Click the [OK] button.