Pjlink, P151, Using the projector on a network – Canon REALiS 4K501ST Pro AV 5000-Lumen LCoS Projector User Manual
Page 151: Setting pjlink [pjlink
151
Using the Projector on a Network
Ad
va
nc
ed
G
uid
e
Using
the
Pr
oje
ctor
on a Networ
k
Setting PJLink [PJLink]
From [PJLink] in the settings screen, you can set the PJLink functions which are the
standard for projector management on a network. For the setting procedure, refer
to “Network Setting” (
). For information about PJLink, refer to “What is
Item
Explanation
Factory default setting
Projector name
Enter the projector name in 1-byte
alphanumeric characters and symbols
(1 - 63 characters).
Canon Projector001
Comment
Enter any relevant notes, such as
where the projector is installed.
<Blank>
Some characters such as # cannot be used for [Projector name] and [Comment].
Item
Explanation
Factory default setting
PJLink
Turn the PJLink function on or off. If
OFF is selected, the PJLink function
will be turned off and the other settings
in this screen cannot be changed.
ON
PJLink authentication
Select whether to turn the PJLink
authentication function on or off. If OFF
is selected, it is not possible to change
the following items.
[Password]
[Confirm password]
ON
Password
Enter the PJLink authentication
password in 1-byte alphanumeric
characters (1 - 32 characters).
system
Confirm password
For confirmation, enter the same
password that you entered in
[Password].
system