Switching the mode to the dicom sim mode – Canon REALiS 4K501ST Pro AV 5000-Lumen LCoS Projector User Manual
Page 78
Advertising
78
Projection Procedure
■
Switching the mode to the DICOM SIM Mode
1
Press the IMAGE button on the remote control until [DICOM SIM] is
displayed or select [DICOM SIM] from [Image mode] in the [Image
adjustment] menu.
2
Press the TEST PATTERN button on the remote control until [DICOM] is
displayed or select [On] from [Test pattern] in the [Install settings] menu.
3
As you view the test pattern, perform [Gamma] adjustment from the
[Image adjustment] menu (
) until the image is optimal.
4
Press the OK button after the setting.
Perform one of the followings to obtain an appropriate projection:
• Darken the ambient light
• Reduce the image size
• Reduce the projection distance
Advertising