Canon REALiS 4K501ST Pro AV 5000-Lumen LCoS Projector - Manual (Page 71)

Projection Procedure
71
Basic
Guide
Pr
oje
cti
on
Pr
oc
ed
u
re
2
Press the pointer buttons to adjust.
To raise or lower the image, use the [ ] / [ ] buttons on the remote control or
projector.
To move the image left or right, use the [ ] / [ ] buttons on the remote control
or projector.
To continue moving the image in a specific direction, hold down the
corresponding button.
3
When the desired position is reached, press the OK button.
Resetting the Position
The lens position after movement with the lens shift function is not returned when
the power is turned off. To return it to its original position, perform reset.
During screen position adjustment, press and hold the
SHIFT button on the remote
control or the LENS button on the projector to display the [Lens shift reset] window.
Two options are available: 50% (home position) or 0%. Use the pointer buttons to
select an option, and then press the
OK button.
• The lens position may be reset slightly misaligned from the position you chose, whether
50% (home position) or 0%.
• For precise positioning, use the lens shift function to fine-tune the position.
Remote control Projector
Screen