Canon REALiS 4K501ST Pro AV 5000-Lumen LCoS Projector - Manual (Page 171)

171
Maintenance
O
ther Information
Main
te
na
nce
6
Align the filter cover tab with the
groove and close the filter cover.
Replacing the Lamp
When the usage time of the lamp exceeds a certain amount of time, the following
message (two types) is displayed for 10 seconds every time the projector is turned
on.
2,700 hours to less than 3,000 hours
Prepare a new lamp when this screen is displayed.
• Only the [ ], [ ], OK , POWER , EXIT , FOCUS , ZOOM and SHIFT buttons are
available while this screen is displayed.
• When you press the POWER button, “Push POWER button again to turn off
power.” message appears.
• After this screen has been displayed for 10 seconds and disappeared, all buttons
become operable.
• This message will not be displayed again if you select [No] in response to the
message “Do you want to display this message again?”.
• Handle the air filter carefully. If damaged, the air filter will not work properly.
• To purchase a replacement air filter (part no: RS-FL03), contact the Canon Customer
Support Center or visit the Canon website.
• Replace the air filter when you replace the lamp.
An air filter is included with orders of a replacement lamp (part no: RS-LP10F).