Canon REALiS 4K501ST Pro AV 5000-Lumen LCoS Projector - Manual (Page 134)

Menu Settings
134
Detailed settings
> [Network settings] > [Detailed settings]
View or manually change the IP address, gateway address, and other network
connection settings. Available only when the network function is [On].
Menu Function
IP address IP address of the projector.
Gateway address Gateway address of the projector.
MAC address MAC address of the projector.
DHCP
TCP/IP settings
Change or specify the IP address, subnet mask, and gateway address
used for connections.
Submenu Function
Off
Disables the DHCP function. TCP/IP settings must be
configured manually.
On
Enables the DHCP function. Searches the DHCP
server. TCP/IP settings cannot be configured
(IP address, subnet mask, and gateway address),
because the IP address is acquired from the DHCP
server.
• This menu is not available (grayed out) when [DHCP] is [On].
• If an invalid value is entered, the message “Invalid entry”
appears. If this occurs, enter a valid value.