Canon REALiS 4K501ST Pro AV 5000-Lumen LCoS Projector - Manual (Page 36)

36
Installation Procedure
Before setting up the projector, be sure to read “Before Installation” ( P19 ).
Setting Up the Projector
■ Positioning the Projector in Front of the Screen
Place the projector in front of the screen.
■ Floor Installation
To adjust the projection position when the projector is installed on the floor, use the
lens shift function (
P50 , P70 ) to adjust the image up / down / left / right.
For information about the relationship between screen size and projection distance,
refer to
page 49 .
• To avoid keystone distortion, install the
projector so that it is at right angles to the
screen.
• The screen must not be exposed to direct
sunlight or light from lighting equipment.
In a bright room, it is recommended that
lights be turned off, curtains be drawn,
and other steps taken to make the screen
easier to see.
• Colors may appear distorted when
images are viewed from the side on
some screens. For best results, use a
matte screen with a wide viewing angle.
Optical axis
Screen
Lens shift