Canon EOS R50 Mirrorless Camera (White) - Manual (Page 101)

3.
Check the icon.
Blinking scene icon (1): Multiple images are captured per shot and
merged into a single image. In this case, only the composite image is
saved.
Normal scene icon display: Shooting with < > settings ( ).
Caution
Continuous shooting is not available.
The camera shoots in [
Electronic ] shutter mode.
The image area is smaller than in other shooting modes.
RAW image quality cannot be set.
Flash photography is not available.
Images that are greatly out of alignment due to camera shake or other issues may
not be aligned correctly.
To prevent camera shake, the camera may set a high ISO speed.
Note that the image may not be rendered with a smooth gradation and may look
uneven or noisy.
The image processing may not be sufficient in scenes with strong backlighting or
high contrast.
Shooting moving subjects may result in afterimages from the movement, or
darkness around the subject.
Images may not be aligned correctly if they are patterned (with a lattice or stripes,
for example), are generally flat and uniform, or are greatly out of alignment due to
camera shake or other issues.
Be careful about camera shake in handheld shots.
Shooting under fluorescent or LED lighting may cause issues such as irregular
exposure or colors in the resulting images, due to the flickering light source.
[
BUSY ] appears on the screen as images are processed, and shooting is not
possible until processing is finished.
Shots will look slightly different from the preview image shown on the screen.
AF point display information is not added to images in some scenes. (
)
101