Canon EOS R50 Mirrorless Camera (White) - Manual (Page 88)

5.
Focus on the subject.
Press the shutter button halfway to focus.
If [ ] blinks, manually raise the built-in flash.
You can also focus by tapping a person's face or other subject on the
screen (Touch AF).
Under low light, the AF-assist beam ( ) is automatically activated if
needed.
Once the subject is in focus, that AF point turns green and the camera
beeps (One-Shot AF).
An AF point in focus on a moving subject turns blue and tracks subject
movement (Servo AF).
6.
Take the picture.
Press the shutter button completely to take the picture.
The image just captured will be displayed for approx. 2 sec. on the
screen.
To retract the built-in flash, push it down with your fingers.
Caution
Subject movement (whether subjects are still or moving) may not be detected
correctly for some subject or shooting conditions.
88