Canon EOS R50 Mirrorless Camera (White) - Manual (Page 627)

Entering the access point encryption key
Enter the encryption key (password) set on the access point. For details on the
encryption key that has been set, refer to the access point's user manual.
The screens displayed in steps 2–3 vary depending on the authentication and
encryption set on the access point.
Go to
Setting the IP Address if the [ IP address set. ] screen is displayed instead of the
screens shown for steps 2–3.
2.
Select a key index.
The [ Key index ] screen is displayed for WEP-encrypted access points.
Select the key index number set on the access point.
Select [ OK ].
3.
Enter the encryption key.
Press the < > button to access the virtual keyboard ( ), then enter
the encryption key.
Select [ OK ] to initiate connection with the access point.
The following screen is displayed once the camera is connected to the
access point.
627