Canon EOS R50 Mirrorless Camera (White) - Manual (Page 147)

Shooting with the Built-in Flash
Shooting with FE Lock
Using the built-in flash is recommended when the [ ] icon appears in the viewfinder or on
the screen, when subjects in daytime shots are backlit, or when shooting under low light.
1.
Manually raise the flash.
In Creative Zone modes, shooting with flash is possible whenever the
flash is raised.
[ BUSY ] is displayed on the screen while the flash is charging.
2.
Press the shutter button halfway.
Confirm that [ ] appears on the screen.
3.
Take the picture.
When focus is achieved and you press the shutter button completely,
the flash will fire at all times.
To retract the built-in flash after shooting, push it down with your fingers
until it clicks into place.
147