FUJITSU SOFTUNE F2 MC-16 - Manual (Page 105)

91
CHAPTER 2 DEPENDENCE FUNCTIONS
■
Event-related Commands in Normal Mode
Since the real-time trace function in the normal mode is actually the single trace function, the commands can
be used to control.
Table 2.2-6 shows the event-related commands that can be used in the normal mode.
Table 2.2-6 Event-related Commands in Normal Mode
Mode Usable Command Function
Normal Mode
SET EVENT
SHOW EVENT
CANCEL EVENT
ENABLE EVENT
DISABLE EVENT Set event
Displays event setup status
Delete event
Enables event
Disables event
SET SEQUENCE
SHOW SEQUENCE
CANCEL SEQUENCE
ENABLE SEQUENCE
DISABLE SEQUENCE Sets sequencer
Displays sequencer setup status
Cancels sequencer
Enables sequencer
Disables sequencer
SET DELAY
SHOW DELAY Sets delay count
Displays delay count setup status
SET TRACE
SHOW TRACE
SEARCH TRACE
ENABLE TRACE
DISABLE TRACE
CLEAR TRACE Sets trace buffer-full break
Displays trace data
Searches trace data
Enables trace function
Disables trace function
Clears trace data