FUJITSU SOFTUNE F2 MC-16 - Manual (Page 328)

314
CHAPTER 2 DEPENDENCE FUNCTIONS
2.6.9.2 Trace Data Display Examples (RAW Data)
This section describes trace data that is displayed in the RAW data mode.
■
RAW Data Display
This format displays frames that are output from the emulator without analyzing them.
Figure 2.6-6 shows a RAW data display example.
Figure 2.6-6 Example of the RAW Data Display
frame no.
Displays frame numbers in decimal notation.
address
Displays a branch address.
Branch destination address = 110C6:"-> 000110C6"
Branch source address = 110A8:"000110A8 ->"
mnemonic
Displays the instructions that are executed.
>SHOW TRACE /RAWDATA -10
frame no. address mnemonic
- 00010 : FF00E1 RETI -> FF010E
- 00009 : FF011F BRA
FF010E -> FF010E
- 00008 : FF010E MOVW A,0190 -> FF00CE [INT]
- 00007 : FF00E1 RETI -> FF010E
- 00006 : FF011F BRA
FF010E -> FF010E
- 00005 : FF010E MOVW A,0190 -> FF00CE [INT]
- 00004 : FF00E1 RETI -> FF010E
- 00003 : FF011F BRA
FF010E -> FF010E
- 00002 : FF010E MOVW A,0190 -> FF00CE [INT]
- 00001 : FF00E1 RETI -> FF010E
00000 : ==== << Break at FF0113 >> =====
Decimal, signed
Frame Number Indicates instruction executed.
Disassemble Description
Hexadecimal Branch
destination address
of branch instruction
Jump address
Break at "address" :
program execution is stopped.
Special frame
Branching by hardware
interrupt
Interrupt