FUJITSU SOFTUNE F2 MC-16 - Manual (Page 108)

94
CHAPTER 2 DEPENDENCE FUNCTIONS
2.2.6.3 Operation in Performance Mode
Event triggers set in the performance mode are used to measure performance. The time
duration between two event occurrences can be measured and the event occurrences
can be counted.
■
Operation in Performance Mode
The event triggers that are set in the performance mode are used to measure performance. The time duration
between two event occurrences can be measured and the event occurrences can be counted.
Figure 2.2-5 Operation in Performance Mode
Events
Enable
Disable
Limited to following
combinations:
1,2 3,4 5,6 7,8
Buffer full break control
Performance measurement
Instructing
MCU to
suspend
operation
SET EVENT
CANCEL EVENT
SHOW PERFORMANCE/STATUS
SET PERFORMANCE
SHOW PERFORMANCE
CLEAR PERFORMANCE DISABLE EVENT
ENABLE EVENT
SHOW EVENT