FUJITSU SOFTUNE F2 MC-16 - Manual (Page 277)

263
CHAPTER 2 DEPENDENCE FUNCTIONS
Reset: Indicates that reset is detected.
Loop Count "Number of times": Displays number of times which loop count occurs.
Extended time stamp frame: Displays here when the value of time stamp is 8191 or more.
Data Lost Error: Indicates that data is lost.
■
Display in Instruction Execution Order (Specify /INSTRUCTION.)
It is a form that is pulled out the divergence frame from the RAW data display, and supplemented between
frames with the reverse-assembly display. Special frames other than the program lockup frame are displayed.
The display in this mode is as follows.
Special frame is as follows.
Trace ON code(data) hit: Indicates that trace acquisition is started.
Trace OFF code(data) hit: Indicates that trace acquisition is stopped.
Reset: Indicates that reset is detected.
Loop Count "Number of times": Displays number of times which loop count occurs.
Extended time stamp frame: Displays here when the value of time stamp is 8191 or more.
Data Lost Error: Indicates that data is lost.
Displays difference of executed time
between this frame and next frame
(decimal).
The unit is cycle.
Display that supplements
between branch frames.
Time stamp
Disassemble Description
Frame Number
Decimal,
signed