FUJITSU SOFTUNE F2 MC-16 - Manual (Page 190)

176
CHAPTER 2 DEPENDENCE FUNCTIONS
2.3.6.4 Displaying Trace Data Storage Status
It is possible to displays how much trace data is stored in the trace buffer. This status
data can be read by specifying /STATUS to the SHOW TRACE command.
■
Displaying Trace Data Storage Status
It is possible to displays how much trace data is stored in the trace buffer. This status data can be read by
specifying /STATUS to the SHOW TRACE.
[Example]
>SHOW TRACE/STATUS
en/dis = enable ; Trace function enabled
buffer full = nobreak ; Buffer full break function disabled
sampling = end ; Trace sampling terminates
code = enable ; Code execution enabled
verbose = disable ; Verbose trace disabled
frame no. = -00120 to 00000 ; Frame -120 to 0 store data
>