FUJITSU SOFTUNE F2 MC-16 - Manual (Page 296)

282
CHAPTER 2 DEPENDENCE FUNCTIONS
2.6.4.1 Setting/Release of Debug Functions
The debug function can be set or released while executing the user program.
■
Commands Available during Execution of User Program
A specific debug feature can be set/released while executing the user program in this emulator debugger.
Either the dialog or the command can be set/released.
Table 2.6-1 shows the commands available during execution of user program. For more details, see
"
● Debugger" in "SOFTUNE Workbench Command Reference Manual".
*1 : Refer to "SOFTUNE Workbench Command Reference Manual".
Table 2.6-1 Commands Available during Execution of User Program
Function
Major Command name
*1
Reset MCU 1.3 RESET
Memory operation (read/write) 5.1 EXAMINE
5.2 ENTER
5.3 SET MEMORY
5.4 SHOW MEMORY
5.5 SEARCH MEMORY
5.8 COMPARE
5.9 FILL
5.10 MOVE
5.11 DUMP
Line assemble/disassemble 6.1 ASSEMBLE
6.2 DISASSEMBLE
Set/delete breakpoint 3.1 SET BREAK (type1)
3.3 SET BREAK (type3)
3.6 CANCEL BREAK
3.7 ENABLE BREAK
3.8 DISABLE BREAK
3.10 SET DATABREAK (type2)
3.12 CANCEL DATABREAK
3.13 ENABLE DATABREAK
3.14 DISABLE DATABREAK
Set/delete sequencer 3.22 SET EVENT(type 2)
3.24 CANCEL EVENT
3.25 ENABLE EVENT
3.26 DISABLE EVENT
3.27 SET SEQUENCE (type1)
3.34 CANCEL SEQUENCE(type 1)
3.36 ENABLE SEQUENCE(type 1)
3.38 DISABLE SEQUENCE(type 1)
Trace operation 4.15 CLEAR TRACE
4.17 ENABLE TRACE (type2)
4.19 DISABLE TRACE (type2)
4.20 SEARCH TRACE