FUJITSU SOFTUNE F2 MC-16 - Manual (Page 206)

192
CHAPTER 2 DEPENDENCE FUNCTIONS
2.3.9 Real-time Monitoring
The real-time monitoring function is used to display the memory contents during
program execution.
■
Real-time Monitoring
The emulator can use the real-time monitoring function when the evaluation chip has the external trace bus
interface.
A real-time monitoring window is provided to display two 256-byte regions for real-time monitoring
purposes. The real-time monitoring window has a function for reading data from the actual memory and
displaying it before program execution (copy function), and a function for displaying updated data in red.
■
When referring to RAM area of the 0 bank
To use the real-time monitoring function in the RAM area of the 0 bank, the coverage function must be
disabled by the following methods.
• Command
DISABLE COVERAGE
Refer to "4.23 DISABLE COVERAGE" in "SOFTUNE Workbench Command Reference Manual".
• Dialog
[Chip] tab on the Setup debug environment dialog.
Refer to "4.7.2.3 Debug Environment" in "SOFTUNE Workbench Operation Manual".