FUJITSU SOFTUNE F2 MC-16 - Manual (Page 80)

66
CHAPTER 2 DEPENDENCE FUNCTIONS
■
MCU Operation Speed
To support a broader range of MCU operation speeds, the emulator adjusts control of the MCU according to
the MCU operation speed.
Normally, set the low-speed operation mode. If the F
2
MC-16H/16F series is operated at high speed and
malfunctions occur, change the setting to the high-speed operation mode.
Also, to start at low speed and then change to high speed because of the gear setting, etc., use the SET
RUNMODE command to change the setting.