FUJITSU SOFTUNE F2 MC-16 - Manual (Page 61)

47
CHAPTER 2 DEPENDENCE FUNCTIONS
2.1.9.3 Trace-Buffer-Full Break
It is a function to abort the program execution when the trace buffer becomes full.
■
Trace-Buffer-Full Break
It is a function to abort the program execution when the trace buffer becomes full.
When a break occurs due to a trace-buffer-full break, the following message is displayed on the Status Bar.
Break at Address by trace buffer full
■
Setting Method
The trace-buffer-full break is controlled by the following method.
• Command
- SET TRACE/BREAK
Refer to "4.29 SET TRACE(type 1)" in "SOFTUNE Workbench Command Reference Manual".
• Dialog
- Trace Set Dialog
Refer to "4.4.8 Trace" in "SOFTUNE Workbench Operation Manual".