FUJITSU SOFTUNE F2 MC-16 - Manual (Page 160)

146
CHAPTER 2 DEPENDENCE FUNCTIONS
2.3.1.6 Debug Function
The debug function has the following two types. Only the function of the selected mode
can be used. The selectable debug mode depends on the emulator or its connection
form.
• RAM Checker mode
• Trace Enhancement mode
■
Setting of Debug Function
Set the debug function. The debug function has the RAM Checker and the Trace Enhancement mode. The
selectable mode depends on the emulator or its connection form. These modes can be set by using [Setup] -
[Debug Environment] - [Select Debug Function] menu or the SET MODE command on the command
window.
At the emulator activated, this is set to the RAM Checker mode.
When the debug function is changed, all the followings are initialized:
• Performance measurement data
• Trace buffer
■
RAM Checker mode
Enables the RAM Checker function. The history of accessing the monitoring addresses can be recorded into
the log file.
■
Trace Enhancement mode
Enable the trace enhancement.
The following functions become available.
1. Trace acquisition in the multi trace mode
2. Trace acquisition control by trace trigger (resumption/pausing/termination)
3. Trace control by data monitoring condition
4. Trace control by sequencer