FUJITSU SOFTUNE F2 MC-16 - Manual (Page 132)

118
CHAPTER 2 DEPENDENCE FUNCTIONS
(7):valid flag
@:valid frame for this data
(8):sequencer level
(9):external probe data
■
Display in Source Line Units (Specify /SOURCE.)
Only the source line can be displayed. This mode is enabled only in the single trace mode while in the
debugging mode.
[Example]
>>SHOW TRACE/SOURCE -194
step no. source
-00194 : gtg1.c$251 {
-00190 : gtg1.c$255 sub5(nf, nd);
-00168 : gtg1.c$259 {
-00164 : gtg1.c$264 p = (char *) &df;
-00161 : gtg1.c$264 p = (char *) &df;
-00157 : gtg1.c$265 *(p++) = 0x00;
-00145 : gtg1.c$266 *(p++) = 0x00;
-00133 : gtg1.c$267 *(p++) = 0x80;
-00121 : gtg1.c$268 *p = 0x7f;
-00116 : gtg1.c$270 p = (char *) ⅆ
-00111 : gtg1.c$271 *(p++) = 0xff;
-00099 : gtg1.c$272 *(p++) = 0xff;